Daewoo KOT-1G0S Service Manual page 21

Microwave oven & hood exhaust
Table of Contents

Advertisement

12. REPLACING -THE CAVITY THERMOSTAT
WARNING :
Personal Injury Hazard
Disconnect from the power supply before servicing the unit. Failure to do so could result in electric shock or
other personal injury.
Discharge the high voltage capacitor before working inside the oven. failure to do so could result in electrical
shock.
CAUTION :
Personal Injury Hazard
Because of the weight and size of the microwave oven, two people are required to safely move and install it.
Failure to do so could result in personal injury.
1. Remove the microwave oven from the microwave oven location.
2. Remove the vent grille and cabinet from the microwave oven. (See the cabinet removal)
3. Remove the wire protector, case blow fan top, vent motor and case blow fan under. Lift the air guide top.
(See 5. replacing the vent motor capacitor, step 3 to 7).
4. Unplug and replace the two wire connectors from the cavity thermostat. (See FIG. 12)
5. Install the new cavity thermostat and reinstall the air guide top, case blow under, vent motor, case blow fan top
cabinet, wire protector and vent grille on the microwave oven.
FIG. 12
20
20

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KOT-1G0S and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Kot-1g0bKot-1g0w

Table of Contents