Test Strip Ejector Function - Infopia Element Neo Instructions For Use Manual

Step 4
• If you selected to use the User Activity option during set up,
press and release ▲ or ▼ button to select the activity (
, ,
release the power button
• If you do not select to use User Activity option during set up,
press the power button
• If you selected to use the User ID option during set up, press
▲ and ▼ button to select the correct User ID, then press the
power button
• Record the result value in your logbook.
When glucose test strip is removed, glucose test meter turns
off automatically.
CAUTION
1. If the test result is out of the test range, "HI/Lo" message will be shown on the LCD
window.
2. Safely discard used glucose test strips and lancets in the proper place, according to the
local regulation.
• After the beeping sound, test
will begin automatically, and
your results will appear in 5
seconds. It should begin
counting down from 5 to 1
second on the LCD display
window. LCD window will
display the result of your blood
glucose level, temperature
and time.
) that correlates with your result, then press and
.
.
.
• 26 •

Test Strip Ejector Function

Disposing of your test strip
Disposing of your lancet
,
CAUTION
1. If you push the ejector button forward too much, it may be part of the failure.
2. Do not give strong impact to blood glucose test meter.
3. Please follow the waste disposal regulations on the used lancets and strips imposed
by your local authorities.
1. Once the test is complete, push the test strip forward to
remove the test strip from the meter
2. Used test strips may be considered bio hazardous waste
in your area.
Be sure to contact your local representative for proper
disposal.
1. Push the needle into the protective cover.
2. Pull the lancet out and discard accordingly.
• 27 •