Element ® Neo Test Strip; Before Testing - Infopia Element Neo Instructions For Use Manual

®
Element NEO Test Strip
Apply Blood
Readwire
Caution
®
1. Store the Element NEO test strip vials in a cool, dry place. Keep out of direct sunlight.
Do not freeze.
2. Store test strips in their original vial only. Do not mix the test strips in new vials or in
any other container.
3. Immediately replace the vial cap and close tightly after removing any test strips from
the vial.
4. Make a note of the expiry date, which is six month from the date you first open a new
®
vial of test strips. Throw Element NEO test strips and vial away after the expiry date.
5. Do not use the test strips after the expiration date printed on the package or vial, since
it may cause inaccurate results.
®
6. Element NEO test strips should be single use only. DO NOT RE-USE.
7. Do not test at temperatures below 10℃(50°F) or above 40℃(104°F).
8. Do not test in the condition that humidity is below 10% or above 90%.
9. Do not bend, cut, or alter the test strip.
10. Avoid getting dirt, food, and water on the test strip with wet hands.
11. Avoid getting dirt, food, and water on the color-coding label (backside of test strip)
12. Refer to additional information in the Element
®
13. Use only Element NEO test strip with your Element
®
NEO test strip package.
®
NEO meter.
• 10 •

Before Testing

WARNING
To reduce the chance of infection:
1. Lancing device and lancets should NOT be shared with others.
2. Always use a new lancet and a new blood glucose test strip.
3. Practice using the lancing device and become accustomed with its use.
4. Lancets and blood glucose test strips should be single use only.
5. Wash your hands in warm and clean running water using soap before testing.
6. Avoid getting hand lotion, oils, dirt or debris on the lancets or on the lancing device.
7. Dry your hands completely before testing.
• 11 •