Infopia Element Neo Instructions For Use Manual page 10

Table of Contents

Advertisement

For example only
If you are using the normal control solution, according to this particular vial of strips, your
meter should show a number between 80 and 120.
H.
255-345
N.
80-120
L.
35-65
Please note that the control values shown in the picture are not control ranges.
NOTE
- It is recommended that glucose control solution is stored at room temperature 20~25
℃ (68~77℉) before testing.
- Check the expiration date before performing a glucose control solution test.
- Do not use if it expired. Once opened, the control solution expires after 3 months.
- In order to perform the more accurate glucose control solution test, you can use the
control solution 3 different levels – low, normal and high.
You can buy each Element®NEO control solution (low, normal and high levels)
separately, please consult your local distributor about control solutions
If your control solution test falls out of range, please follow the next steps before
contacting customer support:
- Check the expiration dates on all the products you are using. Be sure you are using
®
Element
NEO Control Solution.
- Try another control solution test.
If this test falls out of range, try another control solution test with a new unopened
bottle of test strips.
After following the appropriate steps and the control test still falls out of range, do not
perform a glucose test. Please call customer support in your local area.
Glucose Control Solution
(HIGH)
3.5ml
- For use with
meter and glucose test strip only.
- Discard the used control solution carefully according to the
local regulations.
Rev. 2012-06-01
Made in Korea
Glucose Control Solution
(NORMAL)
- For use with
meter and glucose test strip only.
3.5ml
- Discard the used control solution carefully according to the
local regulations.
Rev. 2012-06-01
Made in Korea
Glucose Control Solution
(LOW)
3.5ml
- For use with
meter and glucose test strip only.
- Discard the used control solution carefully according to the
local regulations.
Rev. 2012-06-01
Made in Korea
• 18 •
Follow-up Action
1. Check your meter and test strips with the glucose control solution.
2. Perform your test again.
CAUTION
1. If your glucose control solution falls out of range, do not perform a glucose test and
please contact your local representative.
2. The glucose control solution's measurement range has nothing to do with individual's
blood glucose level, as its own purpose is to check the status of test strip and meter.
Discard the used control solution and test strips carefully, according to the local
regulation.
• 19 •

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gluneo

Table of Contents