Open Scan (Os) Mode; Group Scan (Gs) Mode & Priority Watch - Uniden UH8010S+ANT Owner's Manual

Operation

Open Scan (OS) Mode

Allows continuous scanning of all selected channels. If an active channel
is found, scanning will stop on that channel. If the received signal
ceases, the unit will wait 3 seconds for the signal to return, otherwise
scanning resumes. After transmission in scan mode, the unit will wait 20
seconds for the signal to return, otherwise scanning resumes. To skip
the active channel, turn the Channel Selector.
Group Scan (GS) Mode & Priority Watch
Includes the accessory feature, Priority Watch, which allows you to
monitor the Instant Priority Channel while scanning.
To use GS Mode Scanning;
1. Press 3 times. Scn shows and the oS/GS setting flashes.
2. Turn the Channel Selector or press / to change the setting to GS.
3. Press to store the setting.
4. Press and hold to save & exit the menu mode.
GS Scanning checks the Instant Priority Channel for activity every 1.5
seconds.
23
UNIDEN UH8010S/UH8020S UHF CB Transceiver