Ctcss & Dcs - Uniden UH8010S+ANT Owner's Manual

Table of Contents

Advertisement

Operation
If the Priority Channel becomes active the radio will stay on that channel
for as long as the signal is present. If the received signal ceases, Priority
Scanning continues after 3 seconds. If scanning stops on a channel
which is not a Priority Channel, the radio will continue monitoring the
Priority Channel for activity while listening to the active one.
To deactivate SCAN, press the
CTCSS (Continuous Tone Coded Squelch System)
& DCS (Digital Coded Squelch)
Turn the Rotary Channel Selector to the desired channel to use CTCSS
or DCS.
1. Press
1 time. CTCSS/DCS setting appears.
2. Turn the Channel Selector or press
CTCSS code 01 - 38 or DCS code 01 - 104 (code 100 - 104 is
represented by o0 - o4). To turn off CTCSS/DCS select the oF code.
3. Press
to store the setting.
4. Press & hold
The CTCSS/DCS code displays for the selected channel.
UNIDEN UH8010S/UH8020S
to save & exit menu mode.
24
button.
/
to select the desired
UHF CB Transceiver

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Uh8010s

Table of Contents