Mounting The Mic Hanger - Uniden UH8010S+ANT Owner's Manual

Mounting the MIC Hanger

The Microphone Hanger comes in two parts. How and where you mount
the MIC hanger will determine which parts to use.
Conventional Mounting with Screws
Use the front part of the MIC Hanger only.
Locate a suitable mounting position and mark and drill two 3mm holes.
Fix the MIC Hanger into place with screws.
Conventional Mounting with Double Sided Tape
(not supplied)
High quality Double-Sided tape can be found at good retail stores.
Secure the front and back pieces of the MIC Hanger using the supplied
binding screws.
Locate a suitable mounting position.
Apply high quality Double-Sided tape
onto the flat area of the MIC
Hanger back piece and then
press firmly to the mounting
position.
11
UNIDEN UH8010S/UH8020S UHF CB Transceiver