Smartguard Setup; Setting Up The System - PACOM PDRH16-RMT series User Manual

User's Manual
Manual Alarm Output: In general, the alarm is activated automatically when any related sensor is
activated. However, the user can activate all the alarm output manually by clicking the button while it is
released or deactivate all the alarm output by clicking the button when it is pressed.
Setup: When the Setup button is clicked, a dialog box appears. The dialog box has nine tabs. See the
following SmartGuard Setup section.
Accessing SmartSearch: Click the Search button to run the SmartSearch.
Full Screen: Click this button to enter the full-screen mode. All of the control buttons disappear, and
the monitoring window takes up the full screen in the full-screen display mode. To return from the
full-screen mode, click the left mouse button anywhere on the screen.

SmartGuard Setup

Setting Up the System

1. Click the Camera icon to enable the camera.
NOTE: Selecting 1-16 tab displays camera channels 1 to 16 and selecting 17-32 tab displays 17 to 32.
2. Click the text field beside Location. If you have a keyboard attached to your unit, enter a location name such as
"Main Office". If you do not have a keyboard connected to the unit, clicking the keyboard icon will display a
virtual keyboard on which you can type by clicking the letters.
10