Recording Video; Figure 54 Mouse Display Menu - PACOM RDRH-EL104 User Manual

Full Screen
Selecting (Full Screen) in the Mouse Display menu and choosing the camera number button
displays the selected camera full screen. It is the same as pressing the individual camera buttons
on the front panel.
2x2
Selecting (2x2) in the Mouse Display menu displays the cameras in the quad (2x2) screen mode.
It is the same as pressing the individual camera buttons in the full screen mode.
Previous Camera, Next Camera
Selecting or (Previous Camera or Next Camera) in the Mouse Display menu moves to the
previous or next camera.
OSD
Selecting (OSD) in the Mouse Display menu toggles OSD On and Off.

Recording Video

Once you have installed the DVR following the instructions in Chapter 2
to record. The DVR will start recording based on the settings you made in the Record setup screen.
See Chapter3 Configuration.
Recycle On or Recycle Off. The factory default is Recycle On. It does this by recording over
the oldest video once the hard disk is full. Setting the DVR to Recycle Off causes it to stop recording
once the hard disk is full.
Standard (CIF), High (Half D1) or Very High (D1). The factory default resolution is Standard.
When set to Standard, the DVR has a maximum recording speed of 120 ips. When set to High,
the DVR has a maximum recording speed of 60 ips. When set to Very High, the DVR has a
maximum recording speed of 30 ips.
Figure 54 Mouse Display menu.
4-Channel Digital Video Recorder
Full Screen
2x2
Previous Camera
Next Camera
OSD
Installation, it is ready
51