Chapter 3 Configuration; Front Panel Controls; Camera Buttons (1 To 4); Figure 3 Dvr Front Panel - PACOM RDRH-EL104 User Manual

Chapter 3
NOTE: Your DVR should be completely installed before proceeding. Refer to Chapter 2
Installation.

Front Panel Controls

Camera Buttons
PTZ/Zoom Button
Search Button
The front panel looks and operates much like a VCR combined with a multiplexer. Many of the
buttons have multiple functions. The buttons on the infrared remote control, while laid out differently,
perform the same functions as those on the front panel. The following describes each button and
control. Take a few minutes to review the descriptions. You will use these to initially set up your
DVR and for daily operations.
NOTE: A separate Alarm button is not provided. Pressing any button on the front panel or
remote control resets alarm output including the internal buzzer when the alarm is activated.
However, when you are in the menu or PTZ mode, you have to exit the menu or PTZ mode
first to reset alarm output.
NOTE: The infrared sensor is just to the right of the arrow buttons. Make certain that
nothing blocks the sensor, or the remote control will not function properly.
NOTE: You can also use a USB mouse (not supplied) to navigate through the screens and
menus much like you would on a computer.
NOTE: When you use wireless communication devices (such as Wi-Fi or Bluetooth) near
the DVR, the remote control might not function properly.

Camera Buttons (1 to 4)

Pressing the individual camera buttons will cause the selected camera to display full screen, and
pressing the button again changes the display format to the quad (2x2) mode. Buttons 1 to 4 are
also used to enter passwords.
Configuration
Figure 3
HDD LED
Arrow Buttons
USB Port
DVR front panel.
Alarm Out LED
Play/Pause Button
4-Channel Digital Video Recorder
Menu Button
Panic Button
7