Using A Mouse; Figure 53 Ptz Preset Screen - PACOM RDRH-EL104 User Manual

User's Manual
< Set Preset > < Move to Preset >
Figure 53 PTZ Preset screen.
While in the PTZ mode, pressing the
PTZ) in the menu displaying at the top of the screen displays the Advanced PTZ
menu.
Set the feature you wish to control by selecting it from the menu. Refer to the camera
manufacturer's instructions for the proper settings. Depending on the camera
specifications, some features may not be supported.
You can use a mouse for convenient PTZ control. Position the mouse pointer at the bottom of
the screen, and the following PTZ toolbar will display.
Clicking
again, position the mouse pointer at the bottom of the screen. Change the
toolbar location by clicking the empty space on the left side of the toolbar and
drag it to where you want it located on the screen. Use the arrow buttons on
the toolbar to pan or tilt the camera in the direction you want. The other controls
on the toolbar perform as described below:

Using a Mouse

You can use a mouse instead of the front panel buttons to perform many of the DVR functions.
In the Live Monitoring mode or Search mode, moving the mouse pointer to the left edge of the
screen displays the following Mouse Display menu.
50
You can save camera position settings as "presets" so that you
can go directly to desired views.
Once you have the camera at the desired settings, press the
button on the front panel. Select Set Preset from
SEARCH
the Move to Preset dialog box, and the PTZ Preset dialog box
will appear. Select the number you want to assign to the preset
and press the
to enter the preset name.
Press the
SEARCH
preset, and the Move to Preset dialog box will appear. Select
the desired preset and press the
on the left side exits the toolbar. If you want to display the toolbar
Zoom In / Out
Iris Open / Close
(Play/Pause) button. Use the virtual keyboard
button on the front panel to load the PTZ
button to load the preset.
button and selecting
MENU
Focus Near / Far
Set / Load Preset
(Advanced