Pre-Event; Event Setup; Alarm-In; Figure 39 Pre-Event Setup Screen - PACOM RDRH-EL104 User Manual

User's Manual
Pre
-Event
Highlight Pre-Event in the Record menu and press the
appears. If you do not have Event set up in the Record Schedule, a message will display alerting
you to this fact.
Figure 39 Pre-Event setup screen.
You can set the amount of time to record prior to the event by adjusting the Dwell. You can set the
Dwell from 5 seconds to 30 seconds. The longer the dwell set, the fewer maximum ips can be set.
NOTE: When the DVR is in the Time or Time & Event mode, it ignores the pre-event settings
and follows the time settings.

Event Setup

Alarm
-In
Highlight Alarm-In in the Event menu and press the
38
When the DVR is in the Event Record mode it
is possible to have it record images before the
event occurs. The Pre-Event screen allows you
to define how to handle pre-event recording.
You can turn individual cameras On or Off for
pre-event recording. The image speed can be
set from 0.10 to 30.00 ips (25.00 ips PAL), and
image quality can be selectable from Very High,
High, Standard and Basic.
Figure 40 Event menu.
button. The Alarm-In setup screen appears.
button, and the Pre-Event setup screen