Table of Contents
Advertisement
User's Manual
Figure 23
RTSP setup screen.
Highlight the box beside RTP Start Port and press the
the RTP server obtained from your system administrator.
Highlight the box beside RTP End Port and press the
RTP server obtained from your system administrator.
Highlight Use Mobile and press the
can access a remote DVR using a Blackberry or other mobile devices.
NOTE: Selecting Use Mobile sets the recorded image resolution to Basic automatically
regardless of your Record settings.
NOTE: Selecting Use Mobile sets the WebGuard service to be enabled automatically
regardless of your WebGuard settings.
NOTE: You can access a remote DVR and monitor live video images using media players,
such as VLC Player, supporting RTSP service. Start the media player on your local PC and
enter "rtsp://ID:Password@IP address:RTSP port number/track ID='channel number'", or
start Internet Explorer on your Blackberry or other mobile devices and enter "http://IP address:
Webguard port number/".
NOTE: Some media players might play video properly depending on network conditions.
NOTE: RTSP service might not be supported, depending on the type of media player.
Highlight the WebGuard tab, and the WebGuard setup screen displays.
Figure 24
WebGuard setup screen.
28
Highlight Enable RTSP (Real-Time
Streaming Protocol) and press the
toggle between On and Off. You will be able
to change the settings if Enable RTPS is
enabled.
NOTE: When selecting Enable RTSP, the
recorded image resolution cannot be set to
Very High during Record setup.
Highlight the box beside RTSP Port and press
the
button. Set the port number of the RTSP
server obtained from your system administrator.
button. Set the end port number of the
button to toggle between On and Off. When set to on, you
Highlight Enable WebGuard Service and
press the
Off. See Appendix – WebGuard for detailed
descriptions of the WebGuard service.
Highlight the box beside Port and press the
button. Set the port number used when accessing
WebGuard by using the Up and Down arrow
buttons to increase or decrease the numbers.
button. Set the start port number of
button to toggle between On and
button to
Hide quick links:
Advertisement
Table of Contents
