Table of Contents
Advertisement
Pressing the
button selects a highlighted item or completes an entry that you have made during
system setup.
Panic Button
Pressing the
PANIC
screen. Pressing the button again will stop panic recording.
Search Button
Pressing the
SEARCH
mode. When entering the search mode, video is paused. Pressing the
back video at regular speed. The screen displays when the DVR is in the Pause mode and the
screen displays
when the DVR is playing back video. The button is also used to load a Preset
View in the PTZ mode.
USB Port
A USB port on the front panel is provided to connect external hard disk or flash drives for video
clip copying or system upgrades. Position external drives close enough to the DVR so that you
can make the cable connections, usually less than 6 feet. Use the USB cable provided with the
hard disk drive to connect it to the DVR.
A USB mouse (not supplied) can be connected to the USB port. You can use the mouse to navigate
through the screens and menus much like you would on a computer.
Remote Control Buttons
button starts panic recoding of all camera channels, and displays
button enters the search mode, and pressing the button again exits the search
Figure 4
ID Button
Camera Buttons
Enter/Pause Button
Menu Button
Playback Mode/Clip Copy Button
Zoom Button
Arrow Buttons
Infrared remote control.
4-Channel Digital Video Recorder
(Play/Pause) button plays
on the
9
Hide quick links:
Advertisement
Table of Contents
