Chapter 2 Installation; Package Contents; Required Installation Tools; Video Input - PACOM RDRH-EL104 User Manual

Chapter 2 Installation

Package Contents

The package contains the following:
y Digital Video Recorder
y Power Adaptor and Power Cord
y User's Manual (This Document)
y RAS Software CD and User's Manual
y Infrared Remote Control

Required Installation Tools

No special tools are required to install the DVR. Refer to the installation manuals for the other
items that make up part of your system.

Video Input

Factory Reset Switch
RS485 Port
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL
camera and an NTSC monitor.
Video Input
Figure 2
Video Out
Network Port
Power Cord Connector
Connect the coaxial cables from the video sources to the BNC Video In
connectors.
DVR rear panel.
4-Channel Digital Video Recorder
Audio In/Out
Alarm Input/Output
3