Table of Contents
Advertisement
7.
Mount the armrest with joystick (paragraph 2.5).
8.
Mount the footrests (paragraph 2.6).
9.
Fold the footplates of the footrests down.
2.4
Mounting or Fold away armrest
L
CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
attachment points of the armrest or armpad.
The armrests can be fold away so the patient can be moved sideways.
2.5
Adjusting of the armrests
L L L L
WARNING:
Risk of tipping over - Check that the armpads are at the same height
on each side.
The armpads are adjustable in 7 different heights.
1. Loosen the locking mechanism slightly by turning the star knob
2. Pull on the locking pin
3. Move the square tubes
at the same time when pulling on the locking pin
4. Loosen the locking pin
5. Check that the locking pin
6. Retighten the locking mechanism by turning the star knob
play of the armrest.
These instructions can also used for removing the armpads.
To mount the armrests on the electric wheelchair:
1. Turn the armrest to the front around the pivot point
.
2. Pull on lever
3. Mount the tube hood
To fold away the armrests from the electric wheelchair:
1. Pull on lever
2. Turn the armrest backwards around the pivot point
until it stops.
Height armpad
.
Ⓐ
and
over each other to adjust the armpad height. Do this
Ⓑ
Ⓒ
.
Ⓐ
is securely fixed.
Ⓐ
Page 13
.
in hole
.
Position tube Ⓒ Ⓒ Ⓒ Ⓒ
260 mm
275 mm
290 mm
305 mm
320 mm
335 mm
350 mm
Table 3: Armrest height
anti-clockwise.
Ⓐ
.
Ⓐ
clockwise to reduce the
Ⓐ
Navix
2012-10
.
Hole 7
Hole 6
Hole 5
Hole 4
Hole 3
Hole 2
Hole 1
Advertisement
Table of Contents
