Adjusting Of The Footrests - Vermeiren NAVIX Instruction Manual

* Adjusting footrests:

3.3.4 Adjusting of the footrests

Height footrest Position Outer
330 mm
355 mm
380 mm
365 mm
390 mm
415 mm
400 mm
425 mm
450 mm
Table 7: Lengths of footrest for
seat height 450 mm and seat angle 5° .
Page 29
1. Loosen the hexagon socket set screws Ⓐ
just under the seat frame on each side.
2. Move the footrest in an horizontal direction
until the correct seat with, by moving the
square tubes Ⓑ and Ⓒ over each other.
3. Retighten the screws Ⓐ properly.
4. Repeat instructions above for the other
footrest.
The maximum position of the seat width is
marked with the triangle on the square tube
Ⓐ Ⓐ Ⓐ Ⓐ . Place the point of the triangle against the
square tube Ⓑ Ⓑ Ⓑ Ⓑ of the seat frame.
The minimum position of the seat width is
with a safe distance of 10 mm between the
square tubes Ⓐ Ⓐ Ⓐ Ⓐ and Ⓑ Ⓑ Ⓑ Ⓑ .
Position inner
tube Ⓐ Ⓐ Ⓐ Ⓐ tube Ⓑ Ⓑ Ⓑ Ⓑ
Hole 1 Hole 3
Hole 1 Hole 2
Hole 1 Hole 1
Hole 2 Hole 3
Hole 2 Hole 2
Hole 2 Hole 1
Hole 3 Hole 3
Hole 3 Hole 2
Hole 3 Hole 1
Navix
2012-10