Table of Contents
Advertisement
2.6
Mounting or removing of the footrests
The wheelchair has two footrests that can be fold away to the "outside" with a 3 point
attachment system ( ,
connection of the footrest to the seat frame.
2.7
Folding the back of the wheelchair
L L L L
WARNING:
Risk of injury – Make sure that both safety pins are engaged.
L L L L
CAUTION:
Chance of pinching – Do not place fingers between the components
of the wheelchair.
For transport the back of the wheelchair can be completely folded to the seat.
1.
Pull gently on the back strap.
2.
The safety pins of the back come loose.
3.
Fold the backrest forward.
,
on the figure below). This system provides a stady, play-free
The mounting of the footrests is done as follows:
1. Hold the footrest sideways at the outside of the
wheelchairs frame and mount the pins
holes
2. Turn the footrest inwards till the pin click in the hole
of the attachment point
3. Turn the foot plates downwards.
To take off the footrests:
1. Fold the foot plates upwards.
2. Pull or push on lever
3. Turn the footrest to the outside of the wheelchair
until the hole comes loose of the pin from
attachment point
4. Pull the footrest upwards until the pins
of the holes
Page 14
.
.
.
.
.
Navix
2012-10
into the
come out
Advertisement
Table of Contents
