Table of Contents
Advertisement
6.
Mount the arm support (paragraph 2.5).
7.
Mount the arm support with joystick (paragraph 2.5).
8.
Mount the footrests (paragraph 2.6).
9.
Fold the footplates of the footrests down.
2.4
Mounting or Fold away arm support
L
CAUTION: Risk of clamping – Keep fingers, buckles and clothes away from the
attachment points of the arm support or armrest.
The arm supports can be fold away so the patient can be moved sideways.
2.5
Adjusting of the arm supports
L L L L
WARNING:
Risk of tipping over - Check that the armrests are at the same height
on each side.
The armrests are adjustable in 7 different heights.
1. Loosen the locking mechanism slightly by turning the star knob
2. Pull on the locking pin
3. Move the square tubes
at the same time when pulling on the locking pin
4. Loosen the locking pin
5. Check that the locking pin
6. Retighten the locking mechanism by turning the star knob
play of the arm support.
To mount the arm supports on the electric wheelchair:
1. Turn the arm support to the front around the pivot
point
.
2. Pull on lever
3. Mount the tube hood
To fold away the arm supports from the electric
wheelchair:
1. Pull on lever
2. Turn the arm support backwards around the pivot
point
Height armrest
.
Ⓐ
and
over each other to adjust the armrest height. Do this
Ⓑ
Ⓒ
.
Ⓐ
is securely fixed.
Ⓐ
Page 11
.
in hole
.
until it stops.
260 mm
275 mm
290 mm
305 mm
320 mm
335 mm
350 mm
Table 2: Armrest height
Ⓐ
.
Ⓐ
clockwise to reduce the
Ⓐ
Navix
2012-04
.
Position tube Ⓒ Ⓒ Ⓒ Ⓒ
Hole 7
Hole 6
Hole 5
Hole 4
Hole 3
Hole 2
Hole 1
anti-clockwise.
Advertisement
Table of Contents
