Suzuki GSX-R1000K5 Service Manual page 379

8-56 CHASSIS
• Draw out the swingarm pivot bearings 1 and the swingarm
cushion rod upper bearings 2 with the special tool.
 09921-20240: Bearing remover set (1 28 mm)

The removed bearings must be replaced with new
ones.
CUSHION LEVER BEARING
• Insert the spacer into bearing and check the play when mov-
ing the spacer up and down.
• If excessive play is noted, replace the bearing with a new one.
• Draw out the cushion lever bearings with the special tool.
 09921-20240: Bearing remover set (1 20 mm)

The removed bearings must be replaced with new
ones.
CUSHION LEVER AND CUSHION LEVER RODS
• Inspect the cushion lever and cushion lever rods for damage.
(2 17 mm)
(2 17 mm)