Suzuki GSX-R1000K5 Service Manual page 24

2-6 PERIODIC MAINTENANCE
SPARK PLUG GAP
• Measure the spark plug gap with a thickness gauge.
• Adjust the spark plug gap if necessary.
 Spark plug gap:
Standard: 0.7 – 0.8 mm (0.028 – 0.031 in)
 09900-20803: Thickness gauge
ELECTRODE'S CONDITION
• Check the condition of the electrode.
• If it is extremely worn or burnt, replace the spark plug.
Replace the spark plug if it has a broken insulator, damaged
thread, etc.

Confirm the thread size and reach when replacing the
plug. If the reach is too short, carbon will be deposited
on the screw portion of the plug hole and engine dam-
age may result.
SPARK PLUG AND IGNITION COIL/PLUG CAP
INSTALLATION
• Screw the spark plugs into the cylinder head with fingers, and
then tighten them to the specified torque.
 Spark plug: 11 N·m (1.1 kgf-m, 8.0 Ib-ft)

Do not cross thread or over tighten the spark plug, or
such an operation will damage the aluminum threads
of the cylinder head.
• Install the ignition coils/plug caps and connect their lead wire
couplers.

* Do not hit the ignition coil/plug cap with a plastic
hammer when installing it.
* Place the ignition coil/spark plug cap so that the cou-
pler does not touch the cylinder head cover.
CONTACT
INCORRECT INCORRECT