Suzuki GSX-R1000K5 Service Manual page 347

8-24 CHASSIS
FRONT FORK INNER ROD LOCK NUT
• Adjust the height H of the inner rod threads by turning the
lock-nut 1 as shown in illustration.
H: 11 mm (0.43 in)
FORK SPRING
• Install the fork spring as shown in the illustration.
• Install the spring 1, washer 2, spacer 3 and spring retainer
4.
FRONT FORK CAP BOLT
• Pull up the inner rod with the special tool A.
• Compress the spring with the special tool B and then insert
the special tool C between the lock-nut and the spacer.
 09940-50120: Inner rod holder A
09940-94930: Front fork spacer holder B
09940-94922: Stopper plate C
Upper side
Lower side