D-MAX DCC-501DV Manual page 16

① Please position the arrow to point to 'DNR' on the SETUP menu by using the UP
and DOWN buttons.
② Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
- OFF : There is no reduction in noise level.
- LOW : There is a small reduction in noise level with almost no ghost image.
- MIDDLE : The most effective mode. There is a sufficient reduction in noise levels
without causing much ghost imaging.
- HIGH : The level of noise is reduced greatly, however there is an increase in ghost
imaging.
Note)
• When AGC is turned off, DNR does not operate
8) SENS UP
SENS UP helps maintain a bright, clear screen image by automatically detecting changes
in the level of light in low light level conditions
① Please position the arrow to point to 'SENS UP' on the SETUP menu by using the
UP and DOWN buttons.
② Please select the mode you wish to operate by pressing the LEFT or RIGHT button.
③ Please press the SETUP button when all the settings are complete
SETUP
LENS MANUAL
SHUTTER ESC
WHITE BAL ATW
BACKLIGHT OFF
AGC LOW
►DNR LOW
SENS-UP OFF
SPECIAL
EXIT
.
SETUP
LENS MANUAL
SHUTTER ESC
WHITE BAL ATW
BACKLIGHT OFF
AGC LOW
DNR LOW
►SENS-UP OFF
SPECIAL
EXIT
16
.