Setup Menu Operation - D-MAX DCC-501DV Manual

5. Setup Menu Operation

1) SETUP MENU
① Please press the SETUP button Settings can now be made. The SETUP menu is
displayed on the monitor.
② Please select any function you wish to activate by using the UP and DOWN
buttons.
The arrow can be moved up or down by using the UP and DOWN buttons.
Please position the arrow to point to the function you wish to operate.
③ Please press the LEFT or RIGHT button if you wish to change mode.
When the LEFT or RIGHT button is pressed, available values and modes are
displayed in order. Please keep pressing the button until you get to the mode you
wish to operate.
④ Please select 'EXIT' and then press the SETUP button to finish the setting.
Note)
• If appears at the mode you wish to operate, it means that there is a sub-menu which can
be selected by pressing the SETUP button.
• If appears at the mode item, it means that there is no mode available to be selected
2) LENS
This function is used to adjust the brightness of the screen.
SETUP
LENS MANUAL
SHUTTER ESC
WHITE BAL ATW
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
EXIT
11
.