D-MAX DCC-501DV Manual page 13

① When the SETUP menu is on the screen, please position the arrow to point to
'SHUTTER' by using the UP and DOWN buttons.
② Please select the ESC shutter mode by pressing the LEFT or RIGHT button.
- FLK : Please select 'FLK' mode when flickering occurs on the screen, due to an
imbalance between illumination and frequency.
(NTSC Model:1/100, PAL Model: 1/120)
- ESC : Auto control of the shutter speed can be achieved. When ESC mode is on,
the speed is controlled automatically according to the brightness of the screen.
- MANUAL : The shutter speed can be controlled manually.
Note)
• While using the internal synchronous system, if the shutter setting is on 'ESC' and the
camera is directly facing a bright fluorescent light, the image on the screen can be
dversely affected. Therefore please choose the installation location with care.
• When 'MANUAL' mode is on, the SENS UP function does not operate.
4) WHITE BALANCE
The screen color can be adjusted by using the WHITE BALANCE function.
① Please position the arrow to point to 'WHITE BAL' on the SETUP menu by using
the UP and DOWN buttons
SETUP
LENS MANUAL
►SHUTTER ESC
WHITE BAL ATW
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
EXIT
SETUP
LENS MANUAL
SHUTTER ESC
►WHITE BAL ATW
BACKLIGHT OFF
AGC LOW
DNR LOW
SENS-UP OFF
SPECIAL
EXIT
13