One-Piece Front Windshield - Ezgo 605586 Repair And Service Manual

WEATHER PROTECTION
Read all of Section B and this section before attempting any procedure. Pay particular attention to all Notes, Cautions and Warnings.
B

ONE-PIECE FRONT WINDSHIELD

Remove protective covering from the windshield (item 2)
(Ref. Fig. 4 on Page Q-6).
Install sash (item 3) on each side of the windshield.
Using a rubber mallet, gently tap sash to ensure wind-
shield seats properly (See Detail A).
Page Q-6
Insert screw (item 4) through washer (item 5), rubber
grommet (item 6) and existing hole in front strut. Secure
with washer (item 5) and lock nut (item 7) (See Detail B).
Do not over-tighten or squeeze grommet.
Place bottom section of windshield on rubber grommets
and press the sash, starting at the bottom, onto the front
strut so that it snaps into place (See Details B and C).
Repeat for opposite side of windshield.
DETAIL B
6
5
4
Front of Vehicle
Fig. 4 Front Windshield
Repair and Service Manual
2
3
7
5
Strut
Windshield
3
DETAIL A
Windshield
3
Strut
DETAIL C