Table of Contents
Advertisement
Lifecycle 9500HR Series Exercise Bikes
How To...REMOVE AND REPLACE THE SEAT PLUNGER
Tools Required: Internal Snap Ring Pliers
STEP 1
Pull the seat pin back and depress the stopper peg on the SEAT POST ROD and guide the seat post from the bike
frame.
STEP 2
Insert the tip of the internal retaining pliers into the SEAT PIN RETAINING RING. Guide the SEAT PIN RETAINING
RING out from the SEAT PIN ASSEMBLY.
STEP 3
Pull the SEAT PIN PIN ASSEMBLY away from the bike frame.
STEP 4
Insert the new SEAT PIN ASSEMBLY into the bike frame. Secure the SEAT PIN ASSEMBLY by installing the PIN
RETAINER RING with the internal retaining ring pliers.
STEP 5
Pull the SEAT PIN back and reinstall the SEAT POST into the bike frame.
NOTE: MAKE SURE THE SEAT IS PROPERLY SECURE BEFORE RIDING.
22
Hide quick links:
Advertisement
Table of Contents
