Lifecycle 9500HR Series Exercise Bikes
How To...REMOVE AND REPLACE THE PEDALS
Tools Required: 5/8 inch open end wrench
STEP 1
To remove the LEFT PEDAL, place a 5/8 inch open end wrench on the PEDAL BOLT and turn the wrench
clockwise.
STEP 2
To remove the RIGHT PEDAL, place a 5/8 inch open end wrench on the PEDAL BOLT and turn the wrench
counterclockwise.
STEP 3
Install the new PEDALS onto the CRANK ARMS. To tighten the PEDALS, place a 5/8 inch open end wrench on the
PEDAL BOLT. Move the wrench counterclockwise for the LEFT PEDAL and clockwise for the RIGHT PEDAL.
Remove
Torque
6-12 ft. Lbs.
Torque
6-12 ft. Lbs.
Remove
21