Jumper Settings (Early Version) - IBM 6151 Maintenance And Service Manual

Jumper Settings (Early Version)
Set the jumpers as follows:
Jl and J2
J3
J4
J5
Set after looking at the EPROM sockets.
Set for Primary or Alternate adapter.
Internal - the adapter address is provided by the
Address Module.
System - the adapter address is provided by the system.
Monitored - the Processor Activity Timer is active.
Not Monitored - the Processor Activity Timer is not
active.
EPROM <c-,........'"
SOCKETS
J3
Pr;mary
~
or
~
ARernate~
.s:::::".
Without
V'
EPROM
Modules
~
With EPROM
Modules
J4
~
Internal
System
J5
~
Monitored
~
Not
Monitored
9-Pin
Connector
AJZB146
(6/88) Adapters 9-071-3