Jumper Settings (Early Version) - IBM 6150 Hardware Maintenance Manual

TNL SN20-9843 (03-27-87) to 75X0152 or 75X0166
Jumper Settings
(Early
Version)
Set the jumpers as follows:
Jl andJ2
J3
J4
J5
Primary
vi
J3
Alternate
9-071-2 Service Manual
Set after looking at the EPROM sockets.
Set for Primary or Alternate adapter.
Internal - the adapter address is provided by the Address
Module.
System - the adapter address is provided by the system.
Monitored - the Processor Activity Timer is active.
Not Monitored - the Processor Activity Timer is not active.
J1 and J2
~
Without
,>-
EPROM
',f'"
Modules
Module
J4
~
Internal
J5
~Monitored
~Not
~Monitored
9-Pin
Connector