IBM 6151 Maintenance And Service Manual page 295

Step 3
1. Ask the operator when the error last occurred.
2. Ask the operator to login on the AIX Operating System.
3. Ask the operator to print a Summary Report of all permanent
errors starting about an hour before the reported error
occurred. The command is (where MMddhhmmyy is month,
day, hour, minute, year):
errpt -d tOl,t04 -sMMddhhmmyy
I
print
4. Check the log for errors. If needed, see Appendix C.
ARE ANY ERRORS RECORDED?
NO No trouble was found. Ask the operator to run the system
with the error log turned on so that if any errors are
detected they will be recorded.
YES Continue on the next page.
(6/88) Problem Isolation Charts 3-0090-3