IBM 6151 Maintenance And Service Manual page 66

Step 7
Notes:
1. If attached, set the power switch on the RT PC 6192 is set to
On.
2. If attached, set the power switch on the IBM 6156 is set to On.
3. Use the ADVANCED DIAGNOSTIC SELECTION menu to
choose the additional test. If needed, see page 2-17.
Run the Additional Tests listed for your SRA number that you
have not run since starting to analyze this SRN. If you are not
able to select and run the additional tests, go to page 3-0030-1.
If you have run the test previously, use the results from that test to
answer this question.
THERE IS A HARDWARE PROBLEM IN YOUR MACHINE. DIAG-2
The Service Request Number is·
WRITE .....down the abuve number.
RETURN....
tu
the Hardware Maintenance and Service Manual.
DID THE ADDITIONAL TEST RESULT IN A SERVICE
REQUEST NUMBER?
NO Go to "Step 18" on page 3-0010-19.
YES Continue On the next page.
3-0010-8 Service Manual