IBM 6151 Maintenance And Service Manual page 392

Step 8
1. Look at the type and slot positions you recorded, and install the
boards and adapters you removed.
2. Set the power switch on the system unit to Off.
3. Install the top cover. If needed, see Section 4.
4. Set the power switch on the system unit to On.
5. Follow the instructions on the menus to run the System
Checkout. If needed, see page 2-17.
TESTING COMPLETE
Press Enter to continue.
DlAO·2
WERE YOU ABLE TO LOAD AND RUN THE "SYSTEM
CHECKOUT" AND DID THE "NO TROUBLE WAS FOUND"
MESSAGE DISPLAY?
NO If you were unable to run the System Checkout because the
system stopped with 5c or 05 displayed in the two-digit
display, go to "Unresolved Problem PIC 0060" on
page 3-0060-1 otherwise, go to "Problem Determination
Procedure PIC 0030" on page 3-0030-1.
YES This completes the repair.
3-9810-8 Service Manual