IBM 6151 Maintenance And Service Manual page 20

xx Service Manual
Section 7, "Diskette Drive" contains a description, specifications,
terminator resistor setting, and parts information for the diskette
drive.
Section 8, "Fixed-Disk Drives" contains a description,
specifications, terminator resistor settings, and parts information
for the fixed-disk drives.
Section 9, "Adapters" contains a description, specifications, switch
or jumper settings, and parts information for each adapter used in
the system unit.
Section 10, "User Input Devices" contains a description,
specifications, a removal procedure, a replacement procedure, and
parts information for each type device used to input data or
commands.
Section 11, "Displays" contains a description, specifications,
control adjustment procedures, and parts information for each IBM
display used with the IBM 6151 System Unit.
Section 12, "Tape Drive" contains a description, specifications, and
parts information for the tape drive used with the IBM 6151 System
Unit.
Appendix A, "Tool Requirements" contains descriptions of the tools
needed to service the IBM 6151 System Unit.
Appendix B, "SRA to FRU Cross-Reference List" contains a list of
each Service Repair Action (SRA) number and the part number and
part name of the field-replaceable unit it represents.
Appendix C, "Error Log Information" provides an overview of the
Error Log reports, commands, and command examples.
A Reader's Comment Form and Book Evaluation Form are
provided at the back of this book. Use the Reader's Comment
Form at any time to give IBM information that may improve the
book. After you become familiar with the book, use the Book
Evaluation Form to give IBM specific feedback about the book.