[Auto Setup]; [Backup Input Setting] - Panasonic PT-DZ21KU Operating Instructions Manual

[DISPLAY OPTION] menu

[AUTO SETUP]

You can set when adjusting a special signal or
horizontally long (16:9, etc.) signal.
1) Press ▲▼ to select [AUTO SETUP].
2) Press the <ENTER> button.
▶
z The [AUTO SETUP] screen is displayed.
3) Press ▲▼ to select an item.
■ To set [MODE] ▶
4) Select [MODE] in Step 3).
5) Press ◀▶ to switch [MODE].
▶
z The setting will change as follows each time
you press the button.
[DEFAULT]
[DEFAULT] Standard setting.
Select when an image aspect ratio
[WIDE] is a wide-screen signal, which does
not meet the [DEFAULT] setting.
Select when displaying a signal
[USER] with a special horizontal resolution
(number of display dots).
▶
zIf [DEFAULT] or [WIDE] was selected in
Step 5)
6) Press the <ENTER> button.
▶
z Automatic adjustment is executed.
[PROGRESS] is displayed while automatically
adjusting. When complete, the system returns
to the [AUTO SETUP] screen.
▶
zIf [USER] was selected in Step 5)
6) Press ▲▼ to select [DISPLAY DOTS],
and press ◀▶ to adjust [DISPLAY
DOTS] to the horizontal resolution of
the signal source.
7) Press ▲▼ to select [MODE].
8) Press the <ENTER> button.
▶
z Automatic adjustment is executed.
[PROGRESS] is displayed while automatically
adjusting. When complete, the system returns
to the [AUTO SETUP] screen.
94 - ENGLISH
[WIDE] [USER]
■ To adjust position automatically ▶
4) Select [POSITION ADJUST] in Step 3).
5) Press ◀▶ to switch [POSITION
ADJUST].
▶
z The setting will change as follows each time
you press the button.
[OFF]
Does not perform automatic
[OFF]
adjustment.
Adjust the screen position and size
[ON]
when auto setup is executed.
■ To adjust signal level ▶
automatically
4) Select [SIGNAL LEVEL ADJUST] in
Step 3).
5) Press ◀▶ to switch [SIGNAL LEVEL
ADJUST].
▶
z The setting will change as follows each time
you press the button.
[OFF]
Does not perform automatic
[OFF]
adjustment.
Adjust black level (on-screen menu
[BRIGHTNESS]) and white level (on-
[ON]
screen menu [CONTRAST]) when
auto setup is executed.
Note
z [SIGNAL LEVEL ADJUST] may not function
properly unless a still image containing clear blacks
and whites is input.

[BACKUP INPUT SETTING]

Set the backup function that switches the signal to the
backup input signal as seamless as possible when
input signal is disrupted.
1) Press ▲▼ to select [BACKUP INPUT
SETTING].
2) Press the <ENTER> button.
▶
z The [BACKUP INPUT SETTING] screen is
displayed.
3) Press ▲▼ to select [BACKUP INPUT
MODE].
4) Press ◀▶ to switch the item.
▶
z The items will switch each time you press the
button.
[OFF] Disables the backup function.
[ON]
[ON]