[3D Frame Delay]; [3D Test Mode]; [3D Test Pattern] - Panasonic PT-DZ21KU Operating Instructions Manual

[3D SETTINGS] menu (PT-DZ21KU and PT-DS20KU only)

[3D FRAME DELAY]

Adjust the timing of the left-right switch of an image.
1) Press ▲▼ to select [3D FRAME
DELAY].
2) Press ◀▶ to switch [3D FRAME
DELAY].
▶
z Values in the following range change by units of
10 us.
0 us to 25 000 us

[3D TEST MODE]

Set the image display format for use with 3D system
adjustments.
1) Press ▲▼ to select [3D TEST MODE].
2) Press ◀▶ to switch [3D TEST MODE].
▶
z The setting will change as follows each time
you press the button.
[SIDE BY
[NORMAL]
SIDE]
[BLACK/ [LEFT/
RIGHT] BLACK]
[NORMAL] Standard setting.
The left eye image is displayed
[SIDE BY SIDE] on the left, next to the right eye
image displayed on the right.
Both the left eye image and right
[LEFT/LEFT]
eye image display the left eye
input signal.
Both the left eye image and right
[RIGHT/RIGHT] eye image display the right eye
input signal.
The left eye input signal is
displayed in the left eye image
[LEFT/BLACK]
and a completely black image is
displayed in the right eye image.
A completely black image is
displayed in the left eye image
[BLACK/RIGHT]
and the right input signal is
displayed in the right eye image.
Note
z The [3D TEST MODE] settings return to [NORMAL]
when the projector is switched off.
z This is disabled when [3D SYSTEM SETTING] is
set to any setting other than [SINGLE].
z This is disabled when [3D TEST PATTERN] is
displayed.

[3D TEST PATTERN]

The 3D test pattern can be used to check operation
and make adjustments even without a 3D signal.
1) Press ▲▼ to select [3D TEST
PATTERN].
2) Press ◀▶ to switch [3D TEST
PATTERN].
z The setting will change as follows each time
Menu screen
Entry screen
Note
z The 3D test pattern cannot be displayed when the
following inputs are selected.
–▶VIDEO input
[LEFT/LEFT]
–▶RGB1 input (only when [RGB IN] is set to [Y/C])
z This is disabled when [3D SYSTEM SETTING] is
set to any setting other than [SINGLE].
[RIGHT/
RIGHT]
▶
you press the button.
Menu screen
+
+
Left: white/
Right: black
Menu screen
+
Left: black/
Right: white
ENGLISH - 89