Security; Art-Net; Disposal; Cautions On Use - Panasonic PT-DZ21KU Operating Instructions Manual

Precautions for use
▶
z Do not install the projector in a confined space.
When it is necessary to install the projector in a confined space, install the air conditioning or ventilation
separately. Exhaust heat may accumulate when the ventilation is not enough, triggering the protection
circuit of the projector.

Security

When using this product, take safety measures against the following incidents.
▶
z Personal information being leaked via this product
▶
z Unauthorized operation of this product by a malicious third party
▶
z Interfering or stopping of this product by a malicious third party
Take sufficient security measures. (
▶
z Make your password difficult to guess as much as possible.
▶
z Change your password periodically.
▶
z Panasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge
your password in case you receive such inquiries.
▶
z The connecting network must be secured by a firewall, etc.
▶
z Set a password for the web control and restrict the users who can log in.

Art-Net

"Art-Net" is an Ethernet communication protocol based on the TCP/IP protocol. By using the DMX controller and
the application software, illumination and stage system can be controlled. Art-Net is made based on DMX512
communication protocol.

Disposal

To dispose of the product, ask your local authorities or dealer for correct methods of disposal.
The lamp contains mercury. When disposing of used lamp units, contact your local authorities or dealer for correct
methods of disposal.

Cautions on use

■ To get a good picture quality
In order to view a beautiful image in higher contrast, prepare an appropriate environment. Draw curtains or
blinds over windows and turn off any lights near the screen to prevent outside light or light from indoor lamps
from shining onto the screen.
■ Do not touch the surface of the projection lens with your bare hands.
If the surface of the projection lens becomes dirty from fingerprints or anything else, this will be magnified and
projected onto the screen. Please put the lens cover (accessory) on the projector when you do not use it.
■ DLP chips
▶
z The DLP chips are precision-made. Note that in rare cases, pixels of high precision could be missing or
always lit. This is not a malfunction.
▶
z Directing a high-power laser beam onto the lens surface can damage the DLP chips.
18 - ENGLISH
pages 124, 144)
