[Picture] Menu; [Picture Mode] - Panasonic PT-DZ21KU Operating Instructions Manual

[PICTURE] menu

Select [PICTURE] from the main menu, and
select the item from the sub-menu.
Refer to "Navigating through the menu"
( page 63) for the operation of the menu

screen.
z After selecting the item, press ▲▼◀▶ to set.

[PICTURE MODE]

You can switch to the desired picture mode suitable
for the image source and the environment in which
the projector is used.
1) Press ▲▼ to select [PICTURE MODE].
2) Press ◀▶ .
▶
z The [PICTURE MODE] individual adjustment
screen is displayed.
3) Press ◀▶ to switch the [PICTURE
MODE].
▶
z The setting will change as follows each time
you press the button.
[STANDARD] [CINEMA]
[USER]
[GRAPHIC]
The picture becomes suitable for
[STANDARD]
moving images in general.
The picture becomes suitable for
[CINEMA]
movie sources.
[NATURAL] The picture is sRGB compliant.
The picture becomes similar to
[DICOM SIM.] that of DICOM Part14 Grayscale
Standard.
The light output is maximized for use
[DYNAMIC]
in bright areas.
The picture becomes suitable for
[GRAPHIC]
input from to the personal computer.
[USER] Set any desired picture mode.
Note
z The factory default picture mode is [GRAPHIC] for
still image input signals and [STANDARD] for movie
based input signals.
z DICOM is an abbreviation of "Digital Imaging and
COmmunication in Medicine" and is a standard
for medical imaging devices. Although the DICOM
name is used, the projector is not a medical device,
and should not be used for purposes such as
diagnosis of display images.
z Press the <ENTER> button when each [PICTURE
MODE] is selected to save as a specified value
when a new signal is input. The data of all items
except [SYSTEM SELECTOR] in the [PICTURE]
menu is saved.
z In the factory default settings, [USER] is set
to images that comply with the ITU-R BT.709
standard.
■ To change the [USER] name ▶
4) Select [USER] in Step 3).
5) Press the <ENTER> button.
▶
z The [PICTURE MODE] detailed screen is
displayed.
6) Press ▲▼ to select [PICTURE MODE
NAME CHANGE].
7) Press the <ENTER> button.
▶
z The [PICTURE MODE NAME CHANGE]
screen is displayed.
[NATURAL]
8) Press ▲▼◀▶ to select the character,
and press the <ENTER> button to
[DICOM enter the character.
SIM.]
9) Press ▲▼◀▶ to select [OK], and
press the <ENTER> button.
[DYNAMIC]
▶
z The picture mode name is changed.
[PICTURE] menu
ENGLISH - 67