Switching Off The Projector - Panasonic PT-DZ21KU Operating Instructions Manual

3)

Switching off the projector

1) Press the power standby < > button.
2) Press ◀▶ to select [OK], and press
the <ENTER> button.
(Or press the power standby < >
button again)
▶
z Projection of the image will stop, and the power
indicator <ON (G)/STANDBY (R)> on the
projector lights in orange.
(The fan keeps running.)
3) Wait until the power indicator <ON
(G)/STANDBY (R)> of the projector
lights in red (and the fan stops) for
approximately 170 seconds.
4) Press the <OFF> side of the <MAIN
POWER> switch to turn off the power.
Note
▶
z Do not turn on the power and project images
immediately after turning the projector off.
Turning on the power while the lamp is still hot may
shorten the lamp life.
z In about 150 seconds after the projector is switched
off and the luminous lamp cooling is started, the
lamp indicators will not light up even if the power
is switched on. Even after 150 seconds, the lamp
may not light up if the power is switched on. After
the power indicator <ON (G)/STANDBY (R)> lights
in red, turn on the power again.
▶
z The projector consumes power even when the
power standby < > button is pressed and the
power is switched off if the projector's main
power is on.
Refer to "Power consumption" (
power consumption.
1) 2)
page 179) for the

Switching on/off the projector
4)
1)
2)
ENGLISH - 53