Configuring General Phone Settings - Aastra 6869i User Manual

Personalizing your phone

Configuring general phone settings

This section explains other settings you can make on your phone.
Selecting the language
You wish to select a different user language for your display.
The user language on your phone is configured using the Aastra Self Service Portal.
For more information about the Aastra Self Service Portal, please refer to chapter
"Aastra Self Service
The language selection is limited to five languages. If the language you want is not
available, then your system administrator can upload additional language packs. Eng-
lish is the standard language and is contained in every language pack.
Selecting the time and date
The settings for the time and date are made by your system administrator. The follow-
ing chapter is thus intended for your system administrator or technician, who will
then set the time and date for you.
As system administrator or technician, you can make global settings for the time and
date for all Aastra SIP phones in the Aastra 400 communication system. If no NTP time
server is entered in the communication system, then you can also make these settings
over the phone. Available settings:
Setting
Settings:
• Time format
• Daylight savings
• Date format
Time zone
Set Date and Time
• Use Network Time
64
Portal", page 7.
Description
• 12-hour or 24-hour clock format.
• List of available summer time formats.
– Off
– 30min summertime
– 1h summertime
– Automatic
• List of available date formats.
List of available global time zones.
Set the time and date manually or select
tings for the time server.
• The settings for the time and date are controlled by the communication
system. The time/date are shown on the display when in the idle state.
Use Network Time and make the set-
Aastra 6867i / Aastra 6869i
eud-1630/1.1 – R3.2 – 10.2014