Aastra 6869i User Manual page 33

Hide number
Hide number
Putting a call partner on hold
You want to briefly interrupt the active call.
You can put the call party on hold and then take them back again on the same phone.
Enquiry call during a call
You want to call someone else briefly without losing your current call partner. Then
you want to resume your conversation with your original call partner.
With the Enquiry function you can call someone else in the middle of a call and put
your original call partner on hold. You can make enquiry calls to both internal and
external users.
<Call number>
Aastra 6867i / Aastra 6869i
eud-1630/1.1 – R3.2 – 10.2014
Activating/deactivating calling line identification restriction permanently:
Press the function key for
➔
Function is activated/deactivated, LED on the function key is switched on/off.
Activating CLIR per call:
1. Press the function key for
2. Enter the call number and press the
➔
Call number is dialled and your own number is not displayed to the called
party.
Putting the active call party on hold:
Press the Hold key.
➔
The call party is put on hold,
Take back the call party on hold:
Press the Hold key, the flashing line key or the
➔
The call is active again.
Setting up an enquiry call (you are in an active call):
Press a free line key (select using the horizontal navigation key, if necessary, and
confirm with the selection key).
Enter the call number and press the
➔
Enquiry call party is called; first call partner is put on hold.
Note:
If the other user does not answer, you can cancel the enquiry call with the Cancel
softkey or with the End key and take back the first call with the flashing line key.
Ending the enquiry call:
Press the Drop softkey or the End key.
Retrieving the first parked call party:
Press the Pick up softkey or the flashing line key.
Hide number.
Hide number.
Select softkey.
is displayed and the LED on the line key flashes.
Pick up
Dial softkey.
Phoning
softkey.
33