Whirlpool ACP102PR Manual page 12

This room air conditioner is equipped with a
power supply cord required by UL. This power
supply cord contains state-of-the-art electron-
ics that sense leakage current. If the cord is
crushed, the electronics detect leakage cur-
rent and power will be disconnected in a frac-
tion of a second.
To test your power supply cord:
1. Plug power supply cord into a grounded
3 prong outlet.
2. Press RESET.
3. Press TEST (listen for click; Reset button
will trip and pop out).
4. Press and release RESET (listen for
click; Reset button will latch and remain
in). The power supply cord is ready for
operation.
NOTES:
• The Reset button must be pushed in for
proper operation.
• The power supply cord must be replaced if
it fails to trip when the test button is pressed
or fails to reset.
• Do not use the power supply cord as an
off/on switch. The power supply cord is de-
signed as a protective device.
• A damaged power supply cord must be re-
placed with a new power supply cord ob-
tained from the product manufacturer and
must not be repaired.
• The power supply cord contains no user
serviceable parts. Opening the tamper-re-
sistant case voids all warranty and perfor-
mance claims.
2-2