Whirlpool ACP102PR Manual page 34

6. To remove the transformer:
a) Cut the two wire ties shown below.
Control Board
Cut 2 Wire Ties
b) Disconnect the transformer wire con-
nectors CN12 (red wires) and CN14
(white wires) from the control board.
CN14
Transformer
CN12
REASSEMBLY NOTE: Be sure to replace the
wire ties that you removed with new ties, and
secure the wires neatly together.
4-8
c) Remove the two transformer screws
and remove the transformer from the
unit.
Screw
Transformer
Screw