Door Disassembly; Front Panel/Door Removal - Maytag MAH2440AW series Service

Disassembly Procedures
!
Disassemble Door Assembly
1. Disconnect power supply to unit.
2. Remove Door Assembly
3. Remove screws on door inner panel.
4. Remove pin through door strike.
5. Unsnap handle from retainer.
©2005Maytag Services
WARNING
16026119 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
6. Remove glass sight window from frame.
NOTE: Align indent in glass with drain hole in frame
during reassembly.
Front Panel/ Door Latch Removal
1. Disconnect power supply to unit.
2. Remove Console.
3. Remove Toe Panel.
4. Remove 3 screws on Front Panel bottom.
23