Disassembly Procedures
!
23.Use weight bolts to lift tub and unhook Suspension
Springs.
24.Grasp the front and rear of the tub and remove from
cabinet.
25.Loosen screw and remove boot from tub lip.
28
WARNING
16026119 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
26.Remove rear Spinner Pulley.
NOTE: After Spinner Pulley bolt is removed Spinner can
fall from tub. Block Spinner to prevent Spinner
from falling free.
27.Remove bolts around perimeter and separate the tub
halves.
NOTE: During reassembly snug bolts in a cross pattern
before tightening to prevent tub warp.
28.Remove Spinner.
©2005Maytag Services