Download Print this page

Emi Filter; Console/Machine Control Removal - Maytag MAH2440AW series Service

24” intl front load washer
Hide thumbs

Advertisement

Disassembly Procedures
!
EMI Filter Removal
1. Disconnect power supply to unit.
2. Remove Top Cover.
3. Remove wiring connectors and ground wires.
Console/Machine Control Board Removal
1. Disconnect power supply to unit.
2. Remove Dispenser drawer.
3. Remove 2 screws located behind dispenser. Remove
1 screw on console right side.
©2005Maytag Services
WARNING
16026119 Rev. 0
To avoid risk of electrical shock, personal injury or
death; disconnect power to unit before servicing.
4. Tip Console to access connectors.
NOTE: Clip wire ties if necessary to gain access to
Control Board.
CAUTION: Do not reassemble washer without
replacing clipped wire ties. Do not remove
wire ties if replacement are not available.
5. Remove connectors from Control Board back.
21

Advertisement

loading

  Related Manuals for Maytag MAH2440AW series