EverFocus TUTIS-16F3 User Manual page 25

DISP-Video: Select a channel for displaying the channel in full-screen when an alarm is
triggered. You can select to display the channel on the Main monitor or Spot monitor. The
Spot monitor is only available for 16CH model.
【Event Duration】：Set up a delay time after an alarm is triggered.
【Copy To】：Applying the same settings to another alarm input channel. Select an alarm
channel or All and then click the Copy button.
Click Apply to apply the settings to the DVR, or click OK to save the settings and exit from the
current menu.
4.1.2.3 HDD
You can configure the alarm settings for the DVR when HDD fails.
【HDD Actions】
Alarm Out: Select an alarm output channel for outputting the signal.
Buzzer: Check the box to enable the buzzer when an alarm is triggered.
E-Mail: Check the box to send email notification when an alarm is triggered. Email operation
requires valid email setup in the Network > Advanced menu.
Event Duration: Set up a delay time after an alarm is triggered.
Click Apply to apply the settings to the DVR, or click OK to save the settings and exit from the
current menu.
20
TUTIS Series DVR