Osd Menu Operation - EverFocus TUTIS-16F3 User Manual

4.

OSD Menu Operation

The DVR can be configured through a series of menus on the screen by using a Mouse, front panel
buttons or the supplied IR Remote Control. The following operations are examples of using a
Mouse. This chapter describes the functions and options of the Configuration Settings in the
on-screen display (OSD) menus. Right-click on the screen, the OSD Root Menu appears.
Main Menu
Single Channel
4 Channels
Next Screen
Start / Stop Record
Record Search
PTZ Control
Intercom
Digital Zoom
PIP
System Inform
System Restart
You can configure the OSD settings in this menu. See 4.1 Main Menu.
Select a channel to display it in full-screen.
Switch to 4, 9 or 16 screen mode (depends on model).
Switch to the next screen divisions (only for 8CH / 16CH models).
Start/stop recording manually.
Note: The START RECORD (manually record) function is only functional
when the DVR is not in the recording mode.
Search for the recordings for Playback and Backup. See 4.1.9 Record
Search.
Control PTZ cameras. See 4.2 PTZ Control.
Select an online user to start using the two-way audio function. Only the
16CH model provides this function.
Zoom in one area via mouse drag. See 4.3 Digital Zoom.
Picture in picture. See 4.4 PIP.
Click to display the system information, including the version, IP address,
recording files, and HDD.
You can lock the Main Menu (4.1.6.2 Advanced), restart the system or
power-off the system.
14
TUTIS Series DVR
Chapter
4