Ptz Control - EverFocus TUTIS-16F3 User Manual

TUTIS Series DVR
4.2

PTZ Control

You can control the connected PTZ cameras using the PTZ Control Panel. Before controlling the
PTZ cameras, you have to configure the PTZ settings on the DVR (see 4.1.3 Channel). To display the
PTZ Control Panel, on the OSD Root Menu, click PTZ Control.
PTZ Button
Direction
Buttons
Call PRE Preset Delete PRE PTZ Speed
PTZ Button: Click to force the PTZ to have 360-degree rotation continuously. You can simply stop the
function by activating any other actions (ex. Change directions / go to Preset Position).
Direction Buttons: Control the moving directions of the PTZ camera.
Zoom, Focus, IRIS: Adjust the zoom / focus / IRIS using the increase "+" and reduce "-" buttons.
Call PRE: Click to turn the camera to the selected Preset Position. After setting up the Preset
Positions, the Preset Numbers will be listed in this drop-down list. Click on the Preset Number, the
camera will turn to the selected position.
Preset: Click to set up the Preset Positions. To set up the Preset Position, use the Direction Buttons
to move the camera to the desired position, click on the Preset field to bring up the on-screen
keyboard and then enter the preset number.
Delete PRE: Click to delete the selected Preset Position. After setting up the Preset Positions, the
Preset Numbers will be listed in this drop-down list. Click on the Preset Number to delete the
selected Preset Number.
PTZ Speed: Adjust the PTZ moving speed. The value is between 0 ~ 9.
Rec. Path: Click the button to start recording the navigation path (the button will display End Path
after clicking on it). Use the direction buttons to navigate the camera view. Click the End Path button
to stop recording. After setting up the recording path, click the Track button can start running the
recording path.
Track: Click to start running the configured recording path above (the button will display End Track
after clicking on it). Click the End Track button to stop running the recording path.
38