Network - EverFocus TUTIS-16F3 User Manual

4.1.4

Network

The DVR allows you to use a Web browser to remotely view and manage the system. You can also
receive live video streaming from the DVR using your smartphone.
Note: Since every Network Configuration is different, please check with your Network
Administrator or ISP to see if your DVR should use specific IP address and/or port numbers.
4.1.4.1 Basic
According to your network environment, select Static IP or DHCP to configure an IP address for
the DVR.
Static IP
【Contact Mode】: Select Static IP to set up a fixed IP or DHCP for DHCP server to automatically
assign an IP configuration for the network connection. If Static IP is selected, you will need to
manually input the IP Address, Subnet Mask, and Gateway. You can find all the configurations
on your computer's network property details.
【NTP Server】 ：Set the time and correct the server address to achieve the time synchronization
of DVR. (no need to change)
【HTTP Port】: Port number for HTTP/WEB communication, for example,
http://192.168.1.220:8000.
【Media Port】：Used to send multi-media data. (Default : 40001 - 40003)
【Intercom port】: The intercom port used for remote device and the DVR.
Note: The range of the above ports is between 1024 and 65535. If some ports are occupied
by other services or devices, try to change them to unused ports. If multiple DVRs are
connected in a same LAN, please make sure all the services ports and IP address are
different.
DHCP
25
TUTIS Series DVR